Mercury Series
ELEGOO Mercury Washing and Curing Station provides you with a streamlined post-processing experience, maximizes your output, and drastically improves print quality.
ELEGOO Mercury Washing and Curing Station provides you with a streamlined post-processing experience, maximizes your output, and drastically improves print quality.
5 products
Mercury XS Bundle
ELEGOO Mercury XS Bundle with Separate Washing and Curing Station for Large Resin 3D Printed Models, Compatible with Saturn and Mars LCD 3D Printers, with a Handheld UV Lamp
[360° all-round exposure] The post-curing station adopts 2 L-shape light bars (each built-in 14 UV LED lights), and added 4 UV LED beads beneath the turntable. Work with 360°auto-rotating turntable and a handheld UV lamp that cures the nooks and crannies and interior of 3D prints, so that the entire model is cured thoroughly without dead ends.
[Dual function of washing and curing] ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient.
[Large washing volume] With an 7000ml large capacity sealed water tank, you can directly wash large models printed by ELEGOO Saturn and Mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity.
[Easy and intuitive operation] With a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. The UV cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing.
[Wide Compatibility] Directly compatible with ELEGOO Saturn or Mars 3 3D printers and the most similar build volume LCD/DLP/SLA 3D resin printers on the market, making your 3D resin print post-processing simple, professional, and efficient.
Mercury X Bundle
[Transparent Yellow Shade] Effective blocking 99.9% UV light. The maximum size of the supporting printer is 9.1 inches
[Faye Mirror Design] The entire effective curing area, light power distribution more uniform.
[360 Degree Three-Dimensional Curing] Curing platform can be 360 Degree automatic rotation, curing size φ200 * 260mm.
[Bottom Light Source Design] The bottom to increase the light source design, the base can also be cured, do not let go of every detail, fully curing the model.
[Sealed Water Tank & Large-Capacity Design] 8000ML large-capacity design, using rubber sealing strips, safe and reliable.
[Operation Knob] Long press 3 seconds to turn on the machine, integrated operation panel plus light with, simple operation.
[Super Long Time Setting] Maximum adjustment of 30 minutes.
[Dual Connector Power Adapter] To meet the needs of CURE and WASH work at the same time.
[Curing Mode and Cleaning Mode Completely Separate] MERCURY X WASH and MERCURY X CURE can work at the same time, one for cleaning work and one for curing work.
Mercury Plus V2.0
[Upgrade Protection Function] Sealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
[Intelligent Curing and Washing.The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.
[Flexible Washing Mode] The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
[Ideal Compatibility] Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints.
[Special Notes]The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
ELEGOO Mercury Plus 2 in 1 Washing and Curing Station 2.0
With dual function of washing and curing integrated in 1 machine,it could greatly saves your desktop space. The sealed washing function is now added, which can effectively block the volatilization of alcohol during the washing process, and protect your health.
Fan-less design of curing mode reduces the noise level giving you a more pleasant experience.
ELEGOO Washing and Curing Machine 2.0
1. Security upgraded
Sealed washing prevents the volatilization of alcohol during the washing process and protects your health. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
2. Less noise when curing
Fan-less design makes sure there are less noise even during the curing process so you focus more on the output.
360° all-round curing
360-degree rotating turntable, you can quickly cure every detail of the model and make the model perfect.
Powerful curing mode
Powerful UV Light of the built-in 16pcs 405nm a UV curing lamp beads to cure the model fast.
Intelligent operation mode
Touch the button, you can see the setting time and remaining time, and the machine will beep when the curing is completed, saving time and effort.
Flexible cleaning method
Wash with platform
If the printed model is not removed from the build platform, please install the build platform on the adjustable platform support (the height of the platform support can be adjusted to fit the liquid level in the bucket, the maximum model height is 120 mm), and then adjust the platform bracket to hang on the top of the pillar to start cleaning.
Wash with bucket
If the printed model has been removed from the build platform, you need to put the model in the cleaning basket (maximum height of the model is 160 mm) and hang the cleaning basket on the top of the pillar to start cleaning the model. Models larger than 15 mm in size can use this cleaning option. Some small models can be cleaned together in a bucket.
Mercury Plus V1.0
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
It is compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Mars2, Mars 2 Pro on the market, which provides you ideal support for your 3D resin prints.
![]() |
Technical Specification:Machine Name: ELEGOO Wash & Cure Machine
Control Method: Touch button
Rated Power: 48W
Input Voltage: 110V/220V 50/60H
UV Light: 385nm+405nm(8+8)
Time Setting: 0-15mins
Machine Size: 200mm*200mm*352mm
Maximum Wash Volume: 125mm*85mm*160mm
Maximum Curing Size: φ140*165mm
Machine Net Weight: 4.8kg
|
Operation Instructions:
![]() |
![]() |
![]() |
Washing with Printing PlatformIf the printed model is not removed from the build platform, please mount the build platform to the adjustable platform bracket (The height of the platform bracket can be adjusted to fit the liquid level in the bucket, up to a maximum model height of 120 mm), then hang the adjustable platform bracket on top of the pillar to start the cleaning. |
Washing with BucketIf the printed model has been removed from the build platform already, you will need to place the model in the cleaning basket (maximum model height is 160 mm) and hang the cleaning basket on top of the pillar to start cleaning the model. Models larger than 15 mm in size are available with this cleaning option. |
Intelligent Curing ControlPlace the curing turntable firmly against the turntable positioning hole and place the model in the center of it. Cover the anti-UV lid which can block 99.95% of ultraviolet rays to protect your vision. Operating with the sensitive touch button and 0.96 inch TFT LCD screen, you can easily set and monitor the time. The machine will beep when the curing is done. |
|
|
|
The height of the platform bracket can be adjusted to fit the liquid level in the bucket to make the models to be cleaned completely. | Powerful UV Light of the built-in 8pcs 385nm and 8pcs 405nm UV curing lamp beads to cure the model fast. | The 360-degree rotating turntable work with UV light can make the models to be cured perfectly. |
Since 2015, ELEGOO has been delivering cutting-edge, user-friendly, and best quality consumer 3D printers at an industry-leading pace. Our brand and products have established the most excellent reputation among professional presses and opinion leaders in the 3D printing community.
Based on 12,000 square meters of production space and with hundreds of thousands of happy customers certified, ELEGOO has advanced and fully equipped factories, relentlessly strives for the most perfect quality control.
While ensuring excellent products, choosing ELEGOO allows you to get the joy of 3D printing at the most cost-effective price on the market. It has always been our intention to make 3D printing tech easier to access for everyone.
If you have any problems with the product you purchased from us, feel free to contact our most dedicated service team. Our technical support engineers and customer service staff will always make every effort to help you swipe away your trouble.