Elegoo Saturn 4 Ultra 16K offers high speed at 150 mm/h, smart heating, amazing precision and easy use, quite the best resin 3D printer for beginners & pros in 2025.

Elegoo Centauri Carbon 2 Combo is a multicolor 3D printer with up to 500 mm/s speed, auto calibration, and a 350°C hardened nozzle. Ideal for beginners and pros.

Elegoo Mars 5 Ultra offers blazing speed at 150mm/h, AI camera & auto leveling with amazing precision, quite the best affordable resin 3D printer for beginners.

Create vibrant four-color prints with ease. The Centauri 2 Combo makes multicolor printing simple, reliable and accessible for makers of all skill levels.

ELEGOO OrangeStorm Giga FDM 3D Printer with a Printing Size of up to 800mm x 800mm x 1000mm, Efficient Heated Bed, Multi-Nozzle Printing, and 300mm/s Printing Speed.

Experience flawless 3D printing with multi-material freedom, smart auto-calibration, and silent high-speed performance — perfect for beginners and pros alike.

Print faster with Centauri 2, a high-speed CoreXY 3D printer featuring easy setup, smart auto-calibration and reliable precision for consistent, high-quality results.

The First emoji®-themed 3D PrinterEverything that feels like you—now in a form you can see, hold, and keep close.Inspired by you. Made by you.More color. More you.Make something that feels like you.An accessory that matches your energy. A desk object that showcases your taste. A gift that hits the mark without explanation.No design skills needed. Pick a model, choose colors and materials, tap print, and welcome your new creation.• Iconic emoji® Exterior    • emoji® Style Build Plate    • Custom UI & emoji® Models    Quality that matches your vibeFrom emojis to everyday creations, everything comes out clean, sharp, and true to design, thanks to precision motion control. Want one in another color? Just print it again.

ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³/16.53x16.53x18.89 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality. Massive Build Volume: With a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether, for large models or multiple smaller objects, this generous build volume provides ample space for your creations. Dual-Gear Direct Extruder: Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance. 300°C High-Temp Nozzle Kit: Our printer features a high-temp nozzle kit capable of reaching up to 300°C. The extended hot end design, along with the 60W ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. Automatic calibration of nozzle PID parameters further improves temperature control stability. Auto Bed Leveling + Auxiliary Leveling: Enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! Additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time. Effective Cooling Performance: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. Two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge results.

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision. Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities. Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. 300°C High-Temp Nozzle: The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance. Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

ELEGOO Neptune 4 Pro FDM 3D Printer with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ /8.85x8.85x10.43 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at an amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed. Dual-Gear Direct Drive Extruder: The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging. 300°C High-temp Nozzle: With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed. Intelligent Segmented Heatbed: With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance. Auto Bed Leveling + Auxiliary Leveling: With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality. Efficient Heat Dissipation: ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball-bearing cooling fans and 4x4020 ball-bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve the overall print quality even at a fast printing speed.

ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches Pre-installed Klipper Firmware: With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing.  Dual-Gear Direct Extruder: The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk. 300°C High-temp Nozzle: With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon. Auto Bed Leveling: The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend. Efficient & Instant Cooling: The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed. Removable Capacitive Touchscreen: The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225x225x280mm Large Printing Size Overview of Neptune 3 Pro: 225*225*280mm market mainstream printing size can meet the needs of most users.With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation. Dual-Gear Direct Extruder: The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS. Nozzle Kit for Better Printing Effect: The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect. Smarter Printing Experience: Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms)Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power.Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage. More Stable Printing: The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life. Ease of Use: PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet. The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress.The 250W high-power hotbed can quickly heat up to 100ºC and start printing.The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.