Product information
Where We Ship
Orders placed on eu.elegoo.com can be shipped to the following countries and regions: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland.
Estimated Delivery Time:
1. In-stock Product: 3-7 workdays for delivery.
2. Pre-owned Product: 4-8 workdays for delivery.
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.
Shipping Restrictions
- Generally, the pre-owned product is only available in the 27 member countries of the European Union, but 5 of these countries may not support, it Bulgaria, Cyprus, Finland, Malta, and Sweden, please refer to the checkout page.
- Some pre-owned products will only support delivery to Germany, it is shown on the product page as shipped from "DE".
- OrangeStorm Giga is not available in Malta, Norway, Switzerland, Cyprus, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI).
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
FREE SHIPPING applies to orders over €50 in most countries and regions mentioned. Orders below €50 will be charged a €15 shipping fee, EXCEPT FOR the following cases:
1. Saturn 4 & Saturn 4 Ultra & Mars 5 Ultra: Each unit attracts a €20 shipping charge.
2. Cyprus: All orders are subject to a €30 shipping fee.
For EU shipments (excluding Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.), we are responsible for customs duties.
As outlined above, individual countries and regions may have specific exceptions. As an illustration, a Cyprus customer ordering one Saturn 4 would be charged a combined shipping fee of €50.
Ownership, Terms, and Risk
Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.
If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If in the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we are able to re-dispatch the item to you.
When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com
Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com
Refund Policy & Warranty Info
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.
Warranty Policy
1. Warranty timeline
Models | Parts List | Warranty Period | |
3D Printing Related Products |
Neptune 3 OrangeStorm Giga |
PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools | No warranty |
Hot End | 3 Months | ||
Extruder Kit | 6 Months | ||
Main Parts of the Machine | 24 Months | ||
Jupiter | Release Film, Tools | No warranty | |
LCD Screen | 3 Months | ||
Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine | 24 Months | ||
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra Jupiter SE |
Release Film, Tools | No warranty | |
LCD Screen, Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine (FEP&Tools Excluded) | 24 Months | ||
Mercury Mercury Plus V1.0/V2.0/V3.0 Mercury X/XS Bundle |
Main Parts of the Machine (Tools Excluded) | 24 Months | |
PHECDA LASER ENGRAVER & CUTTER- 10w/20W |
Main Parts | PCB, Motor, Laser head, Power Adapter | 24 Months |
Other Parts① | Fans | 6 Months | |
Other Parts② | Synchronous belt, motor connection line, laser connection line | 3 Months | |
Consumables and Other attached |
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. | No warranty | |
Arduino Kits, Robot Kits & Component Kits | All | All | 24 Months |
Pre-owned Products | All | All | No warranty |
Accessories (For individual purchases) | Release Film:FEP/PFA/ACF | Release film is a consumable product without warranty | No warranty |
LCD Screen: Mars/Jupiter |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 3 Months | |
LCD Screen: Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/Jupiter SE |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 6 Months | |
Build Plate | Damage caused by scratches, drops or bumps is not covered by the warranty. | 6 Months | |
Resin Tank | Installation tools and screws are not warranted | 6 Months | |
Air Purifier: Mini/USB/Mars Mate |
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 24 Months | |
Mini Heater | Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 24 Months | |
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle | No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). | 6 Months | |
3D Stainless Steel Funnel | 3D Stainless Steel Funnel is a consumable product without warranty | No warranty | |
PEI Platform Kit/PEI Magnetic Platform Kit | PEI Platform Kit is a consumable product without warranty | No warranty | |
Nozzle Kit | Nozzle Kit is a consumable product without warranty | No warranty | |
PTFE Tube | PTFE Tube is a consumable product without warranty | No warranty | |
Hotend Kit | Hotend Kit (Nozzle, PTFE Tube Excluded) | 3 Months | |
Extruder Kit/Printhead Kit | Entire Dual-Gear Direct Extruder Kit | 6 Months | |
Cooling Fan Kit | Including 4010/4015 Blower Fan and 6010 Axial Flow Fan | 24 Months | |
STM 32-bit Silent Motherboard | Motherboard | 24 Months | |
Enclosure | All | 24 Months | |
Dual Printhead Mounting Plate | All | 24 Months | |
Four-Printhead Mounting Plate | All | 24 Months | |
5KG Large Spool Holder Kit | All | 24 Months | |
Camera | All | 24 Months | |
Filament Vacuum Storage Bags Kit | The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. | 1 Month | |
Rotary Attachment: PHECDA Laser Engraver |
All | 24 Months | |
10W/20W Air Assist:PHECDA Laser Engraver | All | 24 Months | |
Enclosure:PHECDA Laser Engraver | All | 24 Months | |
Honeycomb Panel: PHECDA Laser Engraver |
Honeycomb Panel is a consumable product without warranty | No warranty | |
Raisers:PHECDA Laser Engraver | All | 24 Months | |
Composite Filter:PHECDA Laser Engraver | Composite Filter is a consumable product without warranty | No warranty | |
10W/20W Laser Module:PHECDA Laser Engraver | All | 24 Months | |
Window Mirror:PHECDA Laser Engraver | Window Mirror is a consumable product without warranty | No warranty | |
20W Adapter:PHECDA Laser Engraver | All | 24 Months | |
Metal Business Cards | All | No warranty | |
Silicone Mat | All | No warranty |
2. Warranty Rules for Laser Head and Tube
A. Laser Head WarrantyRules:
The rate of laser power drop is related to the frequency of use, working hours, and working environment.
B. Laser Tube Warranty Rules:
a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;
b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;
c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.
3. Warranty Period
All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.
4. Warranty Forfeiture
The following Conditions Are Not Covered Under Warranty:
A. Products without sufficient proof of purchase
B. Lost or stolen products
C. Items that have expired their warranty period
D. Non-quality-related issues (after 30 days of purchase)
E. Free products
F. Repairs through 3rd parties
G. Damage from outside sources
H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
I. Purchases from illegitimate resourcesor second-handed parties
J. Normal discoloration, wear, or consumption during product use.
Return & Refund Policy
1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.
If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.
A. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.
B. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.
C. For used products or orders beyond 14 days, refunds for unwanted products are not available.
Unwanted Issue |
|||||
|
Product Status |
Items |
Responsibility of Return Shipping Charges |
Restocking Fee |
Deduction Fee |
Refund |
|||||
Within 14 Days |
Unopened |
√ |
Customer |
5% based on the order amount |
If the returned machine detects key parts missing, the corresponding fees will be deducted. |
Open-box and unused |
√ |
Customer |
15% based on the order amount |
||
Used |
× |
× |
× |
||
Within Warranty |
All Status |
× |
× |
× |
× |
Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.
The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.
After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.
2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.
A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.
Quality-Related Issue |
|||||
|
Items |
Responsibility of Fees |
|||
Refund |
Replace |
Repair |
Return Shipping Charges |
Repair Fees |
|
Within 14 Days |
√ |
√ |
√ |
Elegoo |
Elegoo |
Within Warranty |
× |
× |
√ |
× |
Elegoo |
Out of Warranty |
× |
× |
√ |
× |
Customer |
Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).
3. Process After Returning Product
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.
Contact Us
Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.
- For 3D printer technical support: 3dp@elegoo.com
- For laser engraver technical support: lec@elegoo.com
- For order issues, unwanted item refunds, or returns: info@elegoo.com
- For STEM kits, robots technical support: service@elegoo.com
When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.
RSG Leveling System
RSG Leveling System
Smart Resume Printing
Smart Resume Printing
RSG Leveling System
RSG Leveling System
PEI Magnetic
Platform
PEI Magnetic
Platform
Ultra-Quiet Printing
Ultra-Quiet Printing
Reliable Extrusion System
Reliable Extrusion System
Smart Resume Printing
Smart Resume Printing
Removable
Touchscreen
Removable
Touchscreen
Auto Leveling
Precise 16-point RSG leveling system adopts a strain gauge pressure sensor on the print head to measure the height between the nozzle and the printing platform at 16 points.
With just one touch, it will automatically calibrate and compensate for any slight variations and unevenness between the heated bed and the print head, ensuring a consistent distance between the nozzle and heated bed and a perfect first layer printing.
Double-gear Extruder
The double-gear metal extruder adopts a spring elasticity adjustment device and special titanium alloy throat pipe for more uniform extrusion force, and continuous & stable filament feeding.
PEI Magnetic Platform
PEI magnetic platform with a spring steel sheet and good adhesion and printed models can easily be removed by bending the print sheet.
Smart Resume Printing
No worry about unexpected power off as the printer can recover from the power outage and continue printing.
With a filament sensor, whenever there are possible accidents like filament runout, filament breakage, or filament blockage, the machine will stop work for resuming printing before the new filament feeds in.
Neptune 3 also comes with a guide wheel structure to reduce the feeding resistance of consumables and noise generation.
Solid metal frame with a portable handle and overhead gantry for maximum stability during printing for better overall print quality.
V-guide roller made of POM with smooth movement, low noise, and wear resistance.
The XY axis adopts the belt tension adjustment device with a hand-tightening nut to conveniently and easily adjust the belt tightness.
The 250W hotbed can quickly heat up to 100ºC to meet the needs of different filament materials and avoid warping issues.
The branded power supply has been repeatedly verified to ensure safe printing and reduce printing errors.
The XYZ axis is driven by TMC2225, E0 axis is driven by TMC2209 with more stable motion performance and a lower printing noise of under 50db, like a person's whisper.
The larger build volume of 220x220x280mm gives you more freedom to produce larger models or carry out batch printing.
A removable 4.3-inch color touchscreen with a multilingual intuitive interface and smooth touch controls by hand or fixed on the base, giving you a user-friendly operating experience.
Double-sided cooling fans with a more reasonable nozzle heat dissipation structure, which automatically shuts down after the nozzle is lower than 50 degrees, reduce fan noise, and prolong the service life of the fan.
What's In Box
Neptune 3 3D Printer
Base Unit
Gantry Frame Unit
Power Supply
Touch Screen
Spiral Cable
Spool Holder
Spool Holder Arm
Power Cable
Handle
Fasteners
Tools
User Manual
Specification
Product Model
Neptune 3
Printing Technology
FDM (Fused Deposition Modeling)
Frame Material
CNC machined aluminium extrusion
Voltage
100-120V/220-240V
File Transfer Method
TF card, USB cable
File Format
STL、OBJ
UI Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Build Volume
220 x 220 x 280 mm³
Printing Platform Size (PEI Area)
230 x 230 mm²
Machine Size
442 x 452 x 530 mm³
Package Size
605 x 490 x 240 mm³
MAXIMUM SIZE FOR MACHINE ACTIVITY/MM
450 x 550 x 750 (Including Rack & Tray)
Net Weight
8.1 kg
Gross Weight
10.35 kg
Max. Nozzle Temperature
260 °C
Max. Hot bed Temperature
100 °C
Resume Printing
Yes
Filament Detection
Yes
Filament Compatibility
PLA / PETG / ABS / ASA
FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
On orders over €50 to most of the countries and regions listed above, there is FREE SHIPPING. For orders below €50, a €15 shipping fee will be charged, EXCEPT for Cyprus where each order will be charged a €30 shipping fee.
We are responsible for customs duties on orders shipped to EU countries, EXCEPT for the following countries and regions: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.