Massive Volume

PRE-ORDER | Neptune 4 Max

€549,99 EUR €409,99 EUR
Shipping calculated at checkout.

  • Print Volume: 420 x 420 x 480 mm³
  • Max Printing Speed: 500 mm/s
  • 121 (11 x 11) Points Auto Bed Leveling
  • Up To 300 °C High-Temp Nozzle
  • Support PLA/TPU/PETG/ABS/ASA/Nylon Filaments
  • WIFI/WLAN/USB Transfer
Pre-order Info:

Estimated Shipping Time from EU Warehouse: January 31, 2025.

  • Free Shipping
  • 2-Year Warranty
  • 14 Days Return
  • Lifetime Support
Product information

Where We Ship


Orders placed on eu.elegoo.com can be shipped to the following countries and regions: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland.

Estimated Delivery Time:

Shipping To Shipping From Estimated Delivery Time
Normal Product Pre-owned Product Pre-order Product
Germany EU warehouse 2-5 workdays 3-7 workdays We will ship the product according to the estimated delivery time on the page, after shipment, it will take several workdays for delivery, similar to the Normal Product.
Austria, Belgium, CzechRepublic, Denmark, Hungary, Italy, Luxembourg, Netherlands, Poland, Slovakia, Slovenia, Sweden 3-7 workdays 4-8 workdays
Estonia, Ireland, Latvia, Lithuania, France, Romania 4-8 workdays 5-9 workdays
Bulgaria, Croatia, Finland, Portugal, Spain 5-9 workdays 6-10 workdays
Greece, Malta 6-10 workdays 7-11 workdays
Cyprus, Norway, Switzerland 7-15 workdays 8-16 workdays

 

Shipping Restrictions


  • Generally, the pre-owned product is only available in the 27 member countries of the European Union, but 5 of these countries may not support, it Bulgaria, Cyprus, Finland, Malta, and Sweden, please refer to the checkout page.
  • Some pre-owned products will only support delivery to Germany, it is shown on the product page as shipped from "DE".
  • OrangeStorm Giga is not available in Malta, Norway, Switzerland, Cyprus, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI).
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees


FREE SHIPPING applies to orders over €50 in most countries and regions mentioned. Orders below €50 will be charged a €15 shipping fee, EXCEPT FOR the following cases:

1. Saturn 4 & Saturn 4 Ultra & Mars 5 Ultra: Each unit attracts a €20 shipping charge.
2. Cyprus: All orders are subject to a €30 shipping fee.

For EU shipments (excluding Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.), we are responsible for customs duties.

As outlined above, individual countries and regions may have specific exceptions. As an illustration, a Cyprus customer ordering one Saturn 4 would be charged a combined shipping fee of €50.

 

Ownership, Terms, and Risk


Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If in the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we are able to re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

Warranty Policy

1. Warranty timeline

Models Parts List Warranty Period
3D Printing Related Products

Neptune 3

Neptune 3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No warranty
Hot End 3 Months
Extruder Kit 6 Months
Main Parts of the Machine 24 Months
Jupiter Release Film, Tools No warranty
LCD Screen 3 Months
Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine 24 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

Jupiter SE
Release Film, Tools No warranty
LCD Screen, Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine (FEP&Tools Excluded) 24 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Main Parts of the Machine (Tools Excluded) 24 Months
PHECDA LASER
ENGRAVER &
CUTTER-
10w/20W
Main Parts PCB, Motor, Laser head, Power Adapter 24 Months
Other Parts① Fans 6 Months
Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
Consumables and
Other attached
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No warranty
Arduino Kits, Robot Kits & Component Kits All All 24 Months
Pre-owned Products All All No warranty
Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No warranty
LCD Screen:
Mars/Jupiter
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months

LCD Screen:
Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra

Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/Jupiter SE

Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
Build Plate Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
Resin Tank Installation tools and screws are not warranted 6 Months
Air Purifier:
Mini/USB/Mars Mate
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 24 Months
Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 24 Months
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No warranty
PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No warranty
Nozzle Kit Nozzle Kit is a consumable product without warranty No warranty
PTFE Tube PTFE Tube is a consumable product without warranty No warranty
Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 24 Months
STM 32-bit Silent Motherboard Motherboard 24 Months
Enclosure All 24 Months
Dual Printhead Mounting Plate All 24 Months
Four-Printhead Mounting Plate All 24 Months
5KG Large Spool Holder Kit All 24 Months
Camera All 24 Months
Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
Rotary Attachment:
PHECDA Laser Engraver
All 24 Months
10W/20W Air Assist:PHECDA Laser Engraver All 24 Months
Enclosure:PHECDA Laser Engraver All 24 Months
Honeycomb Panel:
PHECDA Laser Engraver
Honeycomb Panel is a consumable product without warranty No warranty
Raisers:PHECDA Laser Engraver All 24 Months
Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No warranty
10W/20W Laser Module:PHECDA Laser Engraver All 24 Months
Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No warranty
20W Adapter:PHECDA Laser Engraver All 24 Months
Metal Business Cards All No warranty
Silicone Mat All No warranty


2. Warranty Rules for Laser Head and Tube

A. Laser Head WarrantyRules:
  The rate of laser power drop is related to the frequency of use, working hours, and working environment.

B. 
Laser Tube Warranty Rules:

a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

 

3. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

 

4. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:
A. Products without sufficient proof of purchase
B. Lost or stolen products
C. Items that have expired their warranty period
D. Non-quality-related issues (after 30 days of purchase)
E. Free products
F. Repairs through 3rd parties
G. Damage from outside sources
H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
I. Purchases from illegitimate resourcesor second-handed parties
J. Normal discoloration, wear, or consumption during product use.

 

Return & Refund Policy

1. For Unwanted Items

*This clause does not apply to Pre-owned & Refurbished items.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

A. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.

B. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.

C. For used products or orders beyond 14 days, refunds for unwanted products are not available.

Unwanted Issue

 

Product Status

Items

Responsibility of Return Shipping Charges

Restocking Fee

Deduction Fee

Refund

Within 14 Days

Unopened

Customer

5% based on the order amount

If the returned machine detects key parts missing, the corresponding fees will be deducted.

Open-box and unused

Customer

15% based on the order amount

Used

×

×

×

Within Warranty

All Status

×

×

×

×

Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.

2. For Quality-Related Items

*This clause does not apply to Pre-owned & Refurbished items.

 A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

Quality-Related Issue

 

Items

Responsibility of Fees

Refund

Replace

Repair

Return Shipping Charges

Repair Fees

Within 14 Days

Elegoo

Elegoo

Within Warranty

×

×

×

Elegoo

Out of Warranty

×

×

×

Customer

 

Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.


2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

3. Process After Returning Product

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

 

Contact Us

Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

  1. For 3D printer technical support: 3dp@elegoo.com
  2. For laser engraver technical support: lec@elegoo.com
  3. For order issues, unwanted item refunds, or returns: info@elegoo.com
  4. For STEM kits, robots technical support: service@elegoo.com

When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

Pre-installed Klipper Firmware

The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up tp 500 mm/s (default 250 mm/s) and up to 8000 mm/s² accelerations, supporting advanced features such as input shaping and pressure adcancing.

Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality.

Klipper High-speed Motherboard

Neptune 4 Max adopts a Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor.

With pre-installed Klipper firmware, the printing speed can reach 500mm/s (default 250mm/s) with up to 8000mm/s acceleration. 8G ROM gives you ample storage capacity for various print files.

In addition, the printer supports input shaping and pressure advance to improve print quality and reduce issues like artifacts, filament ooze, and blobbing. With acceleration sensors on the X-axis and Y-axis to automatically calibrate resonance compensation parameters for less vibrations and precise prints.

Massive Space for Your Creations

With a spacious build volume of 420 x 420 x 480 mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations.

300°C High-Temp Nozzle

The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon.

The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance.

Powerful Extruder & Upgrade Hotend

The dual-gear direct extruder with a 5.2:1 reduction ratio for reliable and smooth filament extrusion, weighing only 290g. All-titanium alloy throat pipe enables fast heat dissipation and reduces nozzle clogging. 60W high-power ceramic heating element and brass heating block provide efficient and uniform heating for quick filament melting even during high-speed printing.

The extended hotend nozzle can withstand temperatures up to 300°C, making it capable of printing PLA, PETG, ABS, ASA, TPU, and high-temp filament nylon.

The automatic calibration of nozzle PID parameters optimizes nozzle thermal performance and temperature control, ensuring consistent and reliable printing results.

Versatile Connectivity and Control

Connect seamlessly with our printer using various options including WIFI, U disk, and LAN connectivity.

Enjoy the convenience of WEB remote control printing and multi-machine network printing control for effortless management of your printing projects.

Just start your printing jobs with a one-key file transfer.

The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation.

The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

The printer features a PEI magnetic platform with a special coating and spring steel sheet, offering excellent adhesion and easy model removal.

The 320W hotbed can quickly heat up to 110°C, reducing wait times and enabling efficient printing across a wide range of materials.

Our printer is built with a robust Z-axis configuration with dual lead screws, dual motors, and double tie rods, ensuring stability and precise vertical movement.

The Y-axis adopts two rows of 3+3V wheels and a double Y-axis profile design for smooth and reliable operation. Silent drives on all axes and POM V-guide wheels reduce noise and provide quiet, smooth, and accurate motion.

What's In Box

Show More(11+)

Specification

Product Model

Neptune 4 Max

Printing Technology

FDM (Fused Deposition Modeling)

Frame Material

CNC machined aluminium extrusion

Voltage

100-120V/220-240V

File Transfer Method

WIFI, USB, WLAN

File Format

STL, OBJ

UI Language

English, French, German, Russian, Italian, Spanish, Japanese, Chinese

Build Volume

420 x 420 x 480 mm³

Printing Platform Size (PEI Area)

430 x 430 mm²

Machine Size

658 x 632 x 740 mm³

Package Size

790 x 690 x 290 mm³

MAXIMUM SIZE FOR MACHINE ACTIVITY/MM

658 x 950 x 960  (Including Rack & Tray)

Max. Nozzle Temperature

300 °C

Max. Hot bed Temperature

85 °C (ambient temperature 25 °C)

Filament Compatibility

PLA / TPU / PETG / ABS / ASA / Nylon

Net Weight

18.1 kg

Gross Weight

21.8 kg

Resume Printing

Yes

Filament Detection

Yes

Max Speed of Tool Head

500 mm/s

Max Acceleration of Tool Head

8000 mm/s²

Show More(15+)

FAQs

How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

What countries do you ship to?

Click to view available countries

Do you offer free shipping service?

On orders over €50 to most of the countries and regions listed above, there is FREE SHIPPING. For orders below €50, a €15 shipping fee will be charged, EXCEPT for Cyprus where each order will be charged a €30 shipping fee.

We are responsible for customs duties on orders shipped to EU countries, EXCEPT for the following countries and regions: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.

Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.