Skip to content
ELEGOO Mars Pro 3D Printer Support Files

ELEGOO Mars Pro 3D Printer Support Files

Click to Download:  

USB Drive Files (Manual & Slicing Software included)-link 1 or link 2 - Google Drive

Manual Book: Click to Download-link 1 or link 2 - Google Drive

Latest Firmware V4.4.3-F2.14-link 1 or link 2 - Google Drive

Update log: ①Hanging printing: Mainly fixed the problem of [when Z is set to zero and the offset is a positive value, the platform will not return to zero when the model is printed, and print directly in the air] ② Delay of turning off the lights on the first layer: Mainly fixes the problem of [the parameter value of "light off delay at bottom layer" is set in the model slice, and the first layer takes effect when printing] ③ Compatible with Chitubox Pro and Chitubox 1.9.0

Caution:  Please make sure whether this firmware matches your printer, wrong update across different printers may turn it unusable. If you run into any problems with the firmware please contact our support team at, we will try our best to help.

How to update:

①Usually, you only need to update the files in the firmware file and copy the files to the root directory of the disk

②Insert the U disk into the printer

③Restart the machine, the update file .SH4 will be updated automatically, after the successful update there will be a beeping sound and restart the machine

④Print the remaining files to be updated on the printer in the following order: .CBD > .txt

Caution: The.SH4 file will be automatically updated after restarting the machine in the shutdown state. Please do not update repeatedly to avoid being prompted "Same Firmware already exists!"


Resin Settings: ELEGOO Printers Resin Setting Sheet

CE Certification:

MARS PRO CstarUI28C02 CE Remark

MARS PRO CstarUI28C02E CE-EMC Test Report

MARS PRO CstarUI28C02L CE-LVD Test Report

MARS PRO CstarUI28C02M CE-MD test report

Or download CE certification from Google Drive

Cart 0

Your cart is currently empty.

Start Shopping